WP_Post Object
(
[ID] => 380
[post_author] => 1
[post_date] => 2022-01-20 22:13:12
[post_date_gmt] => 2022-01-20 22:13:12
[post_content] => This tutorial will help you with changing oil in a Ford 340b, and other similar tractor models.
oil absorbent granules - because oil is going to get on the floor. Every darn time! You're going to spill something sooner or later, so just get some.
Video on the oil change procedure for the Ford 340b (for those who don't want to read this blog post)
For those who don't like youtube videos, the content is below!
Locate and Identify the Ford tractor's oil filter
Determine the location of your tractor's oil filter. On this Ford 340b, the filter is on the Left side, if you are sitting in the tractor seat.
The current filter on my Ford 340b is a Donaldson P550008.
It took me forever to find a compatible filter, but after a couple hours of internet searching, I am pretty sure I found one. Time to drive to my local Tractor Supply Center (TSC) to see if they have what I need.
The CountyLine Baldwin B2 Oil Filters look to be a fit for the Ford 340b, but I'll have to verify this when I get home.
After a quick side by side comparison, I deem this to be a match.
Changing the Oil
Once you have acquired a compatible Oil Filter, like the Baldwin B2 oil filter or the Donaldson P550008 locate the oil plug. On this Ford 340b the oil plug is on the left side of the tractor. Put your oil pan directly under the oil plug.
With the oil pan underneath the oil plug, use your 1 inch socket to remove the oil plug. Be careful this oil plug might be really hard to turn, and you don't want to round the bolt head of the oil plug!
Once the plug has been removed, the tractor is going to be draining 7 quarts of really gross, old oil.
While the oil is draining, do some other handy tractor maintenance. This is when I sit on the tractor seat and make cool tractor noises, and if I'm feeling really handy, I'll clean the terminals and battery connections with a Battery Terminal Cleaning Brush.
Once the oil is done draining, put the oil plug back in and tighten it.
Seriously, put the oil plug back in and tighten it. This is the time to do it.
Now remove the old oil filter. Try not not let oil run out of it onto the floor. Some oil is going to run down the tractor, and hopefully into your Oil Drain Pan. Yeah, maybe.
Before installing the new filter, write the date, tractor engine hours and oil type on the new filter with a permanent marker. Also write this down in your tractor maintenance logs.
Now take some clean motor oil and smear it on the rubber gasket on the new oil filter, then install the new oil filter until it's hand tight. Don't be wienie, but also don't over tighten it. I know, this is vague, but it's got to be kinda tight, but not too tight. You have a tractor, you'll figure it out.
Now it's time to add the new motor oil. Locate the oil filler cap. My 340b has it on the right side of the tractor.
My Ford tractor also has a front loader on it, so this is where the funnel with extension saved me.
The view of the long funnel from the top:
Ford 340b Oil Capacity with Filter Change
U.S. quarts: 7
Imperial quarts: 5.9
Liters: 6.6
Use your dipstick to gauge the oil fullness, not the quarts or liters.
Oil dipstick on my tractor is on the lower right side of the tractor
If you can't find the dipstick, check out the video at the top of the post. A front loader really helps to hide that sneaky dipstick!
Add the motor oil until the dipstick reads full, then start the engine and check for leaks. Then stop engine and check oil again! You'll likely have to add more oil, as some of the oil is now in the oil filter, reducing the amount of oil in the oil pan.
Ok, you are done changing oil in a Ford 340b. You are now ready to tackle anything life throws at you.
I'll be back with another post and video, when I do the next maintenance task.
[post_title] => Changing oil in a Ford 340b
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => open
[post_password] =>
[post_name] => changing-oil-in-a-ford-340b
[to_ping] =>
[pinged] =>
[post_modified] => 2022-01-20 22:13:12
[post_modified_gmt] => 2022-01-20 22:13:12
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.b3ck.org/?p=380
[menu_order] => 0
[post_type] => post
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
This tutorial will help you with changing oil in a Ford 340b, and other similar tractor models.
Read More »
b3ck.org I tinker. I fix. Therfore I am.
This tutorial will help you with changing oil in a Ford 340b, and other similar tractor models.
The current filter on my Ford 340b is a Donaldson P550008.
It took me forever to find a compatible filter, but after a couple hours of internet searching, I am pretty sure I found one. Time to drive to my local Tractor Supply Center (TSC) to see if they have what I need.
The CountyLine Baldwin B2 Oil Filters look to be a fit for the Ford 340b, but I'll have to verify this when I get home.
After a quick side by side comparison, I deem this to be a match.
With the oil pan underneath the oil plug, use your 1 inch socket to remove the oil plug. Be careful this oil plug might be really hard to turn, and you don't want to round the bolt head of the oil plug!
Once the plug has been removed, the tractor is going to be draining 7 quarts of really gross, old oil.
While the oil is draining, do some other handy tractor maintenance. This is when I sit on the tractor seat and make cool tractor noises, and if I'm feeling really handy, I'll clean the terminals and battery connections with a Battery Terminal Cleaning Brush.
Once the oil is done draining, put the oil plug back in and tighten it.
Seriously, put the oil plug back in and tighten it. This is the time to do it.
Now remove the old oil filter. Try not not let oil run out of it onto the floor. Some oil is going to run down the tractor, and hopefully into your Oil Drain Pan. Yeah, maybe.
Before installing the new filter, write the date, tractor engine hours and oil type on the new filter with a permanent marker. Also write this down in your tractor maintenance logs.
Now take some clean motor oil and smear it on the rubber gasket on the new oil filter, then install the new oil filter until it's hand tight. Don't be wienie, but also don't over tighten it. I know, this is vague, but it's got to be kinda tight, but not too tight. You have a tractor, you'll figure it out.
Now it's time to add the new motor oil. Locate the oil filler cap. My 340b has it on the right side of the tractor.
My Ford tractor also has a front loader on it, so this is where the funnel with extension saved me.
The view of the long funnel from the top:
Ford 340b Oil Capacity with Filter Change
If you can't find the dipstick, check out the video at the top of the post. A front loader really helps to hide that sneaky dipstick!
Add the motor oil until the dipstick reads full, then start the engine and check for leaks. Then stop engine and check oil again! You'll likely have to add more oil, as some of the oil is now in the oil filter, reducing the amount of oil in the oil pan.
Ok, you are done changing oil in a Ford 340b. You are now ready to tackle anything life throws at you.
I'll be back with another post and video, when I do the next maintenance task.
[post_title] => Changing oil in a Ford 340b
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => open
[post_password] =>
[post_name] => changing-oil-in-a-ford-340b
[to_ping] =>
[pinged] =>
[post_modified] => 2022-01-20 22:13:12
[post_modified_gmt] => 2022-01-20 22:13:12
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.b3ck.org/?p=380
[menu_order] => 0
[post_type] => post
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
This tutorial will help you with changing oil in a Ford 340b, and other similar tractor models.
Read More »